Here’s the most disgusting part of the whole removal/installation process: removing the wax seal. You can also try separating the tank from the bowl. Warning: Toilets can be heavy, so be careful when you remove this. Then, gently tilt the bowl from side to side to detach it.
If it is caulked, use a utility knife to break the connection. Pull the Toiletīefore you pull the toilet, check to see if the base is caulked. If the nuts and bolts still don’t nudge, use the hacksaw to cut them at the base. Let the oil sit for a little bit before trying again. If these pieces are being stubborn and not moving, use the lubricant to loosen them. Use the adjustable wrench to loosen the nuts, washers, and bolts. This should be pretty easy to pop off, but you can also use a screwdriver if necessary. Remove the plastic caps (also known as toilet bolt caps) that cover the bolts. Place the water supply line in the bucket in case there’s any water inside that needs to drain out. Then, disconnect the toilet tank from the water supply line using the tongue-and-groove pliers. Use the sponge and bucket to remove any remaining water. However, you may find some water lingering around at the bottom. With the water supply connection severed, they will not refill. Once the water is off, flush the toilet to drain the tank and the bowl. Turn Off the Waterįirst things first, you have to turn off the water supply by turning the stop valve on the wall, so you don’t find yourself dealing with an accidental plumbing disaster.
Also, just to be safe, try to find a new toilet that matches your current one as much as possible. Measure the distance from the toilet’s bolts to the wall to get an idea of the waste pipe size. Ugh! Avoid this hassle altogether by measuring your current toilet before you purchase a new one. Nothing is more frustrating than realizing your new toilet doesn’t fit halfway through your DIY installation. Follow this step-by-step guide to toilet replacement, and don’t hesitate to contact us if you need toilet plumbing service! Tools and Materials Replacing and installing a new toilet isn’t rocket science, but it does require patience, the right tools, and a bit of plumbing know-how.
0 kommentar(er)
